Referencias

INTEC Wood waste fired hot gas generator with thermal oil heating system

• Total capacity: 17.000 kW
• Branch: Panel Boards
• Installation site: Malaysia

INTEC Compact - heater

• Capactiy 250 kW
• Branch: Bio and Oleochemicals
• Installation site: Malaysia

3 x INTEC Heavy fuel fired thermal oil heater

• Capacity: 3 x 4,070 kW
• Branch: PET, Chemical
• Installation site: India

INTEC thermal oil heater ET 3500 for Shell

• Capacity: 3,500 kW
• Installation site: Australia

INTEC Natural circulation boiler "iNook"

Type iNook 1500 / iNook 1000

• Capacity: 1500kW / 930 kW
• Scope of delivery: natural circulation boilers
• steam generators, switchgears
• Designated use: manufacturing of emulsifiers
• Delivery: December 2010
• Installation site: Malaysia
• Branch: Food Industry

Thermal oil heater with high pressure atomizing burner with air pre-heating

• Capacity: 18,000 kW
• Feed line temperature: 330 °C
• Burner: high pressure atomizing burner, modulating
• Fuel: Heavy fuel oil
• Installation site: Taiwan
• In Operation: 2011
• Branch: Synthetic Fibers, PET Granulat

Natur gas fired thermal fluid heater INTEC ET 5000-40 VS with air pre-heater

• Capacity: 5,000 kW
• Feed line temperature: max. 335 °C
• Volume flow thermal oil: 248 m³/h
• In Operation: since 2010
• Installation site: The Netherlands
• Branch: Nutrition, Pharma, Polymer Intermediates, Chemicals

INTEC Thermal oil heater ET 12000-30 VS

• Capacity: 12,400 kW
• Feed line temperature: 360 °C
• Burner: in duobloc arragement as steam atomization burner with autom. mod. control for the combustion of heavy fuel oil
• Installation site: Taiwan
• In operation: since 2010
• Branch: PET Granulat

INTEC thermal oil heater ET 3500-30 HS with air preheater, horizontal Design

• Capacity: 3,500 kW
• Max. feedline temperature: 335 °C
• Burner: Rotary Cup Burner for heavy fuel oil
• Installation site: Taiwan
• In Operation: since 2010
• Branch: Chemie

Gas fired thermal fluid heater vertical design with air pre-heater and stack

• Capacity: 12,00o kW
• Max. feed line temperature: 340 °C
• In operation since: 2010
• Installation site: Belgien
• Branch: Chemical

INTEC heavy fuel oil thermal oil heater

• Type: ET 1500-55 HS
• Capacity: 1,500 kW
• Feed line temperature: max. 280°C
• Installation site: Guatemala
• Customer: Oleochemie

Solid fuel firing system for the combustion of wood waste and sander dust.

• Combustion capacity: 53 MW
• For heating an MDF / production
• Turkey

Energy system fired with wood waste

• Capacity 53MW
• For heating a MDF-plant
• Burgos, Spain

Solid fuel firing system for the combustion of bark, wood waste and sander dust.

• Capacity 19 MW (net)
• For heating an OSB / particleboard production
• Czech Republic
• Project phase: Involvement into the power supply at the factory is been effected.

Hopper dredger

• 1 x 1,000 kW INTEC light oil fired thermal oil heater,
• 2 x    500 kW INTEC exhaust gas boilers

Thermal oil heater, horizontal design

• Fired with natural gas
• Capacity of 1,650kW,
• For heating a fryer
• Texas, USA