Deutsch
English
Русский
Español

References

INTEC Thermal fluid heater ET 5800-25 VS and ET 4000-25 VS with air preheater and heat exchanger for feed water

  • Capacity: 5,800 kW / 4,000 kW
  • Feed line temperature: 300 °C
  • Combustion efficiency appr.: 93 %
  • In Operation since 2012
  • Installation site: Germany
  • Branch: Oleochemical 

Crane shot for delivery to Russian

06.02.2014, INTEC oil heater unit: Heater with cooled turning plate, air preheater and stack, GOST certificated

  • Heater capacity: 14,000 kW
  • Feed line temperature: 280 °C
  • Burner: Duoblock, modulating
  • Fuel: LFO/NG
  • Installation site: Russian
  • Branch: Particleboard production
Dec. 2012
March 2013

Fluidized bed combustion system for coal firing

Generation of process heat, using thermal oil steam for a production line in the plastics industry

  • Two identical lines
  • Firing capacity: 13.80 MW per line
  • Thermal oil system: 11.63 MW per line
  • Installation site: Taiwan
  • Assembly beginning of September 2012
  • Commissioning: from January 2013

Hybrid solar-biomass plant in Spain

The worldwide first hybrid solar-biomass power station of its sort

2 parallel installed solid fuel firing systems for burning wood chips with 2 gas burners and a separate gas-fired thermal oil heater, to produce steam for power generation even if no sun appears

  • Line of business: Solar Power Plant
  • Total output: 2 x 25 MW (biomass) plus 1 x 5.6 MW
  • Grate firing capacity: 2 x 25 MW
  • Gas firing capacity : 2 x 22 MW plus 1 x 5.6 MW
  • Thermal oil system: 2 x 19.5 MW and 1 x 5 MW
  • Installation site: Spain
  • Commissioning: September 2012

INTEC Wood waste fired hot gas generator with thermal oil heating system

  • Total plant firing capacity: 17.000 kW
  • Grate firing: 15.000 kW
  • Sander and screen dust firing: 2.000 kW
  • Hot gas to dryer: 8.000 kW
  • Thermal oil heating system: 9.000 kW
  • Fuel description: Bark, chips, wastes from production, reject fibre, palm fibre, sander dust
  • Installation site: Malaysia

Ready for delivery: INTEC compact thermal oil heater

  • Capacity: 250 kW
  • Feed line temperature: max. 300°C
  • Volume flow thermal oil: 16 m³/h
  • Heating: 2 pc. electro flange units, each with 9 steps (9 x 13,9 kW)
  • Installation site: Malaysia

 

 

3 x Heavy fuel fired thermal fluid heater INTEC ET 4000

  • Capacity: 3 x 4,070 kW
  • Burner: High pressure atomising type
  • Max. feed line temperature: 330 °C
  • Components, delivered by INTEC: secondary loops completely assembled, control cabinet, primary pumps, fuel oil supply system, combustion air fan, engineering for boiler house, supply pipeline stress analysis
  • Fuel: Heavy fuel oil
  • Installation site: India
  • Branch: PET, Chemical

INTEC Natural gas fired thermal fluid heater ET 3500 für Shell

  • Capacity: 3,500 kW
  • Feed line temperature: max. 300°C
  • Volume flow thermal oil: 145 m³/h
  • Burner: Modulating burner, monobloc type
  • Fuel: Natural gas
  • Scope of INTEC delivery: Thermal fluid heater with insulation and instrumentation
  • Installation site: Australia

INTEC Natural circulation boiler "iNook"

Type iNook 1500 / iNook 1000

  • Capacity:  1500kW / 930 kW
  • Scope of delivery: natural circulation boilers
    steam generators, switchgears
  • Designated use: manufacturing of emulsifiers
  • Delivery: December 2010
  • Installation site: Malaysia
  • Branch: Food Industry

 

 

Thermal oil heater with high pressure atomizing burner with air pre-heating

  • Capacity: 18,000 kW
  • Feed line temperature: 330 °C
  • Burner: high pressure atomizing burner, modulating
  • Fuel: Heavy fuel oil
  • Installation site: Taiwan
  • In Operation: 2011
  • Branch: Synthetic Fibers, PET Granulat

Natur gas fired thermal fluid heater INTEC ET 5000-40 VS with air pre-heater

  • Capacity: 5,000 kW
  • Feed line temperature: max. 335 °C
  • Volume flow thermal oil: 248 m³/h
  • In Operation: since 2010
  • Installation site: The Netherlands
  • Branch: Nutrition, Pharma, Polymer Intermediates, Chemicals

INTEC Thermal oil heater ET 12000-30 VS

  • Capacity: 12,400 kW
  • Feed line temperature: 360 °C
  • Burner: in duobloc arragement as steam atomization burner with autom. mod. control for the combustion of heavy fuel oil
  • Installation site: Taiwan
  • In operation: since 2010
  • Branch: PET Granulat

INTEC thermal oil heater ET 3500-30 HS with air preheater, horizontal Design

  • Capacity: 3,500 kW
  • Max. feedline temperature: 335 °C
  • Burner: Rotary Cup Burner for heavy fuel oil
  • Installation site: Taiwan
  • In Operation: since 2010
  • Branch: Chemie

Gas fired thermal fluid heater vertical design with air pre-heater and stack

  • Capacity: 12,00o kW
  • Max. feed line temperature: 340 °C
  • In operation since: 2010
  • Installation site: Belgien
  • Branch: Chemical

 

 

INTEC ET 3500-30 HS with air preheater

  • Capacity: 3488 kW
  • Max. feed line temperature: 335 °C
  • Volume flow thermal oil: 220 m³/h
  • Burner: Rotary, monobloc
  • Fuel: heavy fuel oil 
  • Installation site: Taiwan
  • In Operation since: 2010
  • Branch: Chemical

INTEC heavy fuel oil thermal oil heater

  • Type:  ET 1500-55 HS
  • Capacity: 1,500 kW
  • Feed line temperature: max. 280°C
  • Installation site: Guatemala
  • Customer: Oleochemie

Solid fuel firing system for the combustion of wood waste and sander dust.

  • Combustion capacity: 53 MW;
  • For heating an MDF / production
  • Turkey

Energy system fired with wood waste,

  • Capacity 53MW
  • For heating a MDF-plant
  • Burgos, Spain

Solid fuel firing system for the combustion of bark, wood waste and sander dust.

  • Capacity 19 MW (net)
  • For heating an OSB / particleboard production
  • Czech Republic
  • Project phase: Involvement into the power supply at the factory is been effected.

Hopper dredger

  • 1 x 1,000 kW INTEC light oil fired thermal oil heater,
  • 2 x    500 kW INTEC exhaust gas boilers

Thermal oil heater, horizontal design

  • Fired with natural gas
  • Capacity of 1,650kW
  • For heating a fryer
  • Texas, USA